### AAYADI - DIMENSIONS:

In Vaastu Shastra, a set of six formulae called Aayadi are used to work out the Length, Breadth, perimeter, area and the height of the building. According to Vaastu Shastra, it is necessary that one follows the Aayadi formulae strictly in order to experience positive effects within the building.

Aayadi constitutes six formulae Aaya, Vyaya, Yoni, Raksha, Vara and Tithi. The remainder obtained by using these formulae, determines whether it is gain or loss. If it is a gain, then the structure is proportionate and stable and the dimensions are right. However if it is a loss, then it means the dimensions are not right and should be suitably corrected.

Aayadi constitutes six formulae Aaya, Vyaya, Yoni, Raksha, Vara and Tithi. The remainder obtained by using these formulae, determines whether it is gain or loss. If it is a gain, then the structure is proportionate and stable and the dimensions are right. However if it is a loss, then it means the dimensions are not right and should be suitably corrected.

- Aaya- is the remainder obtained when Length is multiplied by 8 and divided by 12
- Raksha- is the remainder obtained when Length is multiplied by 8 and divided by 27
- Vyaaya- is the remainder obtained when Breadth is multiplied by 9 and divided by 10
- Yoni- is the remainder obtained when Breadth is multiplied by 3 and divided by 8
- Vara- is the remainder obtained when Height is multiplied by 9 and divided by 7
- Tithi- is the remainder obtained when Height is multiplied by 9 and divided by 30

- Aaya and Raksha formuale are used to fix both the Length of the building and of the rooms.
- Aaya also known as 'aadhayam', means income and 'Vyaya' means loss or expenditure. Therefore, the Aaya should always be greater than the Vyaya.
- Using the Aayadi formulae it has been concluded that for the Aaya to be more than the Vyaya the length of rooms/building should preferrably be 1.5 times the breadth or at least 1.375 times the width.
- This is why we find that sites are generally not square but rectangular with a Length 1.375 - 1.5 times the Breadth. For example: Sites have dimensions of 40 x 60, 30 x 40, 30 x 45, and 50 x 80.

- The Yoni and Vyaya formulae are used for fixing the breadth of the building.
- If the Yoni obtained is an odd remainder, then it is good whereas if it is even, then it is considered bad Yoni.
- 1, 3, 5 and 7 remainders are considered good Yoni and are associated with the directions East, South, West and North, respectively.
- Therefore depending on the direction the building faces, the corresponding Yoni should be used to fix the breadth of the building/rooms.
- The Yoni of the first floor should be the same as the Yoni of the ground floor.
- When an old house is being renovated, then a new Yoni different from the Yoni of the old house should be used for the renovated house.

- The Yoni formula defining the breadth measurement is useful for buildings that are not oriented to the cardinal directions.
- Vastu Shastra clearly emphasizes the importance of orienting buildings towards the four cardinal directions (North, East, South or West) so that they can withstand the impact of monsoon winds and natural energies and also benefit from them.
- As far as possible, buildings should not be oriented to the intermediate directions.
- But in rare situations, if the site faces an intermediate direction, the Yoni formula should be used so that the remainder is 1. This will ensure that the dimensions of the building are such that it can withstand the forces of nature.

- The height of the building can be fixed using the Vara and Tithi formulae.
- The height of the first floor should not be more than that of the Ground floor.

UNITS OF MEASUREMENT IN VAASTU SHASTRA:

In the olden days the units of measurement were the Angula (3/4 of an inch) and Hasta ( 18 inches) so that 1 Hasta equals 24 Angulas. However the value of Hasta and Angula were different in different regions. Therefore, by using the Aayadi formulae for fixing the dimensions of a building, the risk of creating disproportionate spaces is eliminated.

This post was about the Vaastu Shastra principle | Aayadi, which is useful for fixing the dimensions of a building. According to Vaastu Shastra, the shape/form of a building was related to it's function.

In the olden days the units of measurement were the Angula (3/4 of an inch) and Hasta ( 18 inches) so that 1 Hasta equals 24 Angulas. However the value of Hasta and Angula were different in different regions. Therefore, by using the Aayadi formulae for fixing the dimensions of a building, the risk of creating disproportionate spaces is eliminated.

This post was about the Vaastu Shastra principle | Aayadi, which is useful for fixing the dimensions of a building. According to Vaastu Shastra, the shape/form of a building was related to it's function.

## No comments:

## Post a Comment